SINEAX Signal Conditioners, Isolator, Splitters & Amplifiers, Loop Power Packs, Transmitters

SINEAX Isolators


TI 816 Signal Isolator 500 V

Input:

0-20 mA, 4-20 mA

Output:

0-20 mA, 4-20 mA,
0-10 V to 2-10 V
  • Loop-Powered Passive Device

  • Order with V or mA Output

  • 600 Ω Maximum Burden (Current)

  • 500 Ω Maximum Burden (Voltage)

  • Only 0.5" (12.5 mm) Wide

  • Low Cost


  

 

DCM 817 Signal Isolator 500 V

Input:

0-20 mA, 4-20 mA

Output:

0-20 mA, 4-20 mA
  • Circuit Board Mounted

  • Loop-Powered Passive Device

  • 600 Ω Maximum Burden

  • Compact and Cost Effective OEM Solution

 

SI 815 Signal Isolator 2300 V

Input:

4-20 mA

Output:

4-20 mA
  • Single and Multi-Channel Versions

  • Output Loop Powered (12-30 V)

  • Transfers Power to Input Loop

  • Optional FSK/Hart Protocol

 


TI 807Signal Isolator up to 4000 V

Input:

0-20 mA, 4-20 mA

Output:

0-20 mA, 4-20 mA
0-10 V
  • Loop-Powered Passive Device

  • One, Two, or Three Channel Versions

  • 1000 Ω Maximum Burden

  


SINEAX Signal Splitters & Amplifiers


TV 808 2-Channel Isolator / Amplifier

Input:

4-20 mA, 0-40 mA,
40 mA
0-40 V, 40 V

Output:

0-20 mA, 4-20 mA,
20 mA
0-10 V, 10 V
  • Dual Channel Versions

  • Signal Splitter Versions

  • 3.7 kV I/O to Power Supply Isolation

  • 2.3 kV Input to Output Isolation

  • Zero and Span Adjustment for Each Channel

  

 

SINEAX Loop Power Packs


B 812 Loop Power Supply with Signal Output and HART Communications

Input:

4-20 mA, 18 to 25.5 VDC
Source resistance 330 Ω

Output:

4-20 mA, 17 VDC no load
Permitted load: 750 Ω, 550 Ω with HART
  • 3.6 kV Input, Output, and Power Isolation

  • Red LED for Open and Short Circuit Fault Detection

  • Designed for HART Protocol

  • Supply Voltage: 20-70 or 60-265 VAC/VDC (45-400 Hz for AC)

   

 


TV 809 Programmable Process Transmitter

Input:

0-30 mV to 0-1000V
0-20 A to 0-100 mA

Output:

0-20 mA to 20 mA, 20-4 mA
0-10 V to 10 V, 10-0 V

  • Fully Isolated

  • Removeable Plugs

  • Unipolar or Bipolar Input and Output

  • Reverse Output Available

  • Custom 57 Point Input Linearization

  • Optional Programmable Relay Alarm

  • PC Programmable

  • Supply Voltage: 24-60 or 85-230 VAC/VDC

   


TV 819 Low Cost Process Transmitter

Input:

0-60 mV to 0-1000V
0-20 mA to 40 mA

Output:

0-20 mA to 20 mA
0-10 V to 10 V

  • Fully Isolated

  • Removeable Plugs

  • Unipolar or Bipolar Input and Output

  • Factory Configured

  • Supply Voltage: 24-60 or 85-230 VAC/VDC

   


Back To API-Camille Bauer


青娱乐视频精品国产,国产精品在线超碰视频在线,国产精品福利再战