Temperature Transmitters - DIN Mount, Head Mounted

DIN Mount Transmitters

V 608 Temperature Transmitter

Input:

Thermocouple, RTD

Output:

4-20 mA
  • PC Programmable
  • Programmable Sensor Fault Response
  • Non-Isolated
  • 12-30 VDC Loop-Powered
Specifications   Instructions

 

V 610 Temperature Transmitter

Input:

Thermocouple

Output:

4-20 mA
  • Two-wire transmitter for installation in the process environment
  • Open and short-circuit sensor circuit supervision / Defi ned output response should the supervision pick up
  • Compact design (housing only 7 mm wide) / Makes maximum use of available space
Specifications   Instructions

 

V 611 Ultra-Slim Temperature Transmitter

Input:

Thermocouple, RTD

Output:

4-20 mA
  • 9 mm (0.35") wide

  • PC Programmable

  • Reverse Output Capable (20-4 mA)

  • 100 Ohm RTD, 2, 3, or 4-wire

  • T/C J, K, T, E, R, S,N, B, L, U, W5, W3

  • Input Linearization

  • Non-Isolated

  • Internal or External CJC

  • Supply Voltage:12-30 VDC from Output Loop


Specifications   Instructions

 

V 624 Programmable Temperature Transmitter

Input:

Thermocouple, RTD,
Thermistor, Custom

Output:

0-2 mA to 0-20 mA, 20-0 mA
0-1 V to 0-10 V, 10-0 V
  • PC Programmable
  • Reverse Output Programmable
  • Custom Input Linearization
  • Programmable Sensor Fault Response
  • Removeable Plugs
  • 3.7 kV Input/Output/Power Isolation
  • Supply Voltage: 24-60 or 85-230 VAC/VDC
Specifications   Instructions

 

V 604s Programmable Universal Transmitter

Two
Inputs:

±1000 mVDC to ±300 VDC
±50 mADC
Thermocouple, RTD,
Thermistor or Potentiometer 0-5k Ω

Two Outputs:
(common ground)

0-5 mA to ±40 mA
0-4 V to -12-15 V
One relay
Modbus communications
 
  • PC Programmable
  • Unipolar or Bipolar Input and Output
  • Reverse Output Programmable
  • Custom Input Linearization
  • Programmable Alarm Relay
  • 3.7 kV Input/Output/Power Isolation
  • Supply Voltage: 24-60 or 85-230 VAC/VDC

Specifications    Instructions
 

VB 604s Programmable Universal Transmitter

Two
Inputs:

±1000 mVDC to ±300 VDC
±50 mADC
Thermocouple, RTD,
Thermistor or Potentiometer 0-5k Ω

Two Outputs:
(common ground)

0-5 mA to ±40 mA
0-4 V to -12-15 V
One relay
Modbus communications
 
  • Measurement of DC voltage, DC current, temperature (RTD, TC) and resistance
  • Sensor connection without any external jumpers
  • 2 inputs (e.g. for sensor redundancy or difference formation)
  • 2 outputs (U and / or I)
  • System capability: Communication via Modbus interface
  • Freely programmable relay, e.g. for limit or alarm signalling
  • AC/DC wide-range power supply unit
  • Pluggable high-quality screw or spring cage terminal

Specifications    Instructions
 

VC 604s Programmable Universal Transmitter

Two
Inputs:

±1000 mVDC to ±300 VDC
±50 mADC
Thermocouple, RTD,
Thermistor or Potentiometer 0-5k Ω

Two Outputs:
(common ground)

0-5 mA to ±40 mA
0-4 V to -12-15 V
One relay
Modbus communications
 
  • Measurement of DC-voltage, DC-current, temperature (RTD, TC) and resistance
  • Sensor connection without any external jumpers
  • 2 inputs (e.g. for sensor redundancy or difference formation)
  • 1 outputs (U ?or I)
  • System capability: Communication via Modbus interface
  • 2 freely programmable relays with changeover contacts, e.g. for limit or alarm signalling
  • AC/DC wide-range power supply unit
  • Pluggable high-quality screw terminals

Specifications    Instructions
 

VQ 604s Programmable Universal Transmitter

Two
Inputs:

±1000 mVDC to ±300 VDC
±50 mADC
Thermocouple, RTD,
Thermistor or Potentiometer 0-5k Ω

Two Outputs:
(common ground)

0-5 mA to ±40 mA
0-4 V to -12-15 V
One relay
Modbus communications
 
  • Fast measurement of DC-voltage, DC-current, temperature (RTD, TC) and resistance
  • Setting time up to 10 ms
  • Sensor connection without any external jumpers
  • 2 inputs (e.g. for sensor redundancy or difference formation)
  • 2 outputs (I)
  • System capability: Communication via Modbus interface
  • Freely programmable relay, e.g. for limit or alarm signalling
  • AC/DC wide-range power supply unit
  • Pluggable high-quality screw terminals

Specifications    Instructions
 

Head Mounted Transmitters



B 812 Loop Power Supply with Signal Output and HART Communications

Input:

4-20 mA, 18 to 25.5 VDC
Source resistance 330 Ω

Output:

4-20 mA, 17 VDC no load
Permitted load: 750 Ω, 550 Ω with HART
  • 3.6 kV Input, Output, and Power Isolation
  • Red LED for Open and Short Circuit Fault Detection
  • Designed for HART Protocol
  • Supply Voltage: 20-70 or 60-265 VAC/VDC (45-400 Hz for AC)

Specifications   Instructions    Brochure

Back To Camille Bauer


青娱乐视频精品国产,国产精品在线超碰视频在线,国产精品福利再战